Stream Backup Settings

Configure the redundancy behaviour to automatically switch stream inputs in case of a failure.

Backup Type - redundancy behaviour type. Default: Active Backup
Initial Delay - delay in seconds before starting the next input after the stream has been initiated. Default: 5 for UDP or SRT; 10 for HLS, HTTP MPEG-TS, or RTSP; 120 for DVB
Start Delay - delay in seconds before starting the next input. Default: 5
Return Delay - delay for Active Backup in seconds for returning to the previous input

The integrated analyzer continuously monitors the active input, and if a fault is detected, it immediately switches to an alternate input.

Active Backup

The default behavior is Active Backup. In the event of a failure, Astra switches to the next input while continuing to analyze the previous inputs for a potential switch back.

If all inputs fail, Astra will continue to stream latest avilable input. To halt streaming, an additional option is available for the Backup Type: "Active Backup and Stop streaming if all inputs are inactive"

Passive Backup

In the event of a failure, Astra switches to the next input and stops the previous input. If the last input fails, Astra will automatically switch back to the first input

Disabled Backup

In the event of a failure, Astra does nothing. This method is suitable for manually switching inputs using the Web Interface or API methods.